How to assemble your Morsø Gas Grill
- Open the lid on your Forno Gas grill
- Mount the handle with a screw on each side. Remember the rubber rings and washers
- Close the grill and place the thermometer. Hold the thermometer and open the grill again
- Screw the nut on the thermometer inside the grill
- The tripartite cast iron grate is placed in the grill
- Place the drip tray on the back of the grill
How to mount the gas bottle to your Morsø Gas Grill
- Dip the tubing in hot water to make the mounting easy
- Place the strap on the tube and mount the tube on the back of the grill. The tube must be completely over the nozzle
- The strap I pushed up and tightened over the nozzle
- Repeat this procedure when mounting the tube on the gas regulator
- Lift the black ring on the gas regulator. Press it down over the gas valve on the bottle. Click – for correct installation
- Remember to turn on the gas before use
How to attach your Morsø Forno Gas Medio (Type1) to the Morsø Tavolo table
- Place the table on the side – use a screwdriver to make the screw holes free
- Place the grill on the table and make sure the holes in the table are opposite the screw holes in the grill
- Install both screws from below and tighten
How to attach your Morsø Forno Gas Piccolo, Medio (Type2) or Grande to the Morsø Tavolo table
- Mount the two plastic cones on the table
- Place the grill on the table and make sure the cones fit into the cone holes on the grill
- Install the safety screw from below and tighten